Animated Logo

Home & Information
Home
About techref.info
News

Technical Support
Go to HELPDESK

Regulations & Safety

Tech FAQ
Tech Reference

ADB ISIS Support
ADB Warp Support
ADB Dimmer Support

Capture Support

ADB Products
ADB
Emil Neithammer
ADB Archive

Related Products
Artistic Licence
Capture Sweden
CCT Lighting
DHA Lighting

Discontinued Lines

Links
Links & Downloads
Light Relief

DMX-Demux

Artistic Licence DMX-Demux
DMX-Demux
Rackmount Demultiplex Unit

The DMX-Demux is a 1U rackmount unit designed to convert DMX512 to 72 or 48 individual analogue outputs.

Input

The Demux will receive both flavours of DMX512 and also provides a passive loop-through for connection to additional DMX receivers to terminaton of the signal. The DMX512 input is optically isolated from the analogue outputs. This is a particular benefit in removing earth loop problems in large installations and outdoor events.

The front panel contains a received data indicator.

Output

The outputs are attached to the rear panel using 25pin D connectors. The 48 channel unit uses two output connectors, whilst the 72 channel version uses three. The outputs may be selected to operate in the following modes:

  • Voltage 0 to +10V (Diode protected, Internal trim to 12V max)
  • Voltage 0 to -10V (Diode protected, internal trim to 12V max)
  • Current 0 to +370uA (Internal trim to 400uA max)
  • Current 0 to -370uA (Internal trom to 400uA max).

The four operating modes ensure compatibility with older Strand and ADB installations. The product is shipped set for 0 to +10V output.

See also:


Back to top of page techref.info website © Copyright 2006-2012
Please read the Conditions of Use of this website.
Need help?
Go to Helpdesk
  Refresh page   Print page