|
|
|
Home & Information
Technical Support
ADB Products
Related Products |
ADB Lighting Technologies 
Navigation:
HOME |
ADB overview
> dimmers
> Eurorack 60
|
Eurorack 60 Range: Installation digital dimmer cabinets
 |
| Eurorack 60 24x 3kW / 12x 5kW / 12x 3kW & 6x 5kW |
Eurorack 60 is a very compact, intelligent, all-digital dimmer rack for wall mounting, intended for professional stage, studio and architectural lighting, wherever high performance, space and cost are the prime considerations. Eurorack 60 is available in a variety of configurations, as illustrated below.
Power configuration
24x 3kW
12x 5kW
12x 3kW & 6x 5kW
12x 3kVA industrial contactors
Main features
DMX digital input; optional analogue inputs
5-key keypad, 12-character LED display and user-friendly menus for easy access to all dimmer functions
Set-up functions can be limited to "DMX Start Address" only
Local controls for creation and storage of 20 (19 + 1 priority) lighting cues
Individual selection of dimmer address (patch), law, smoothing and reduction factor
Fade smoothing (4000 step resolution)
10 dimmer laws (one user-programmable), selectable per dimmer channel
Remote programming and monitoring facility as standard using ADBNET
Extended diagnostics functions available as an option
Professional-grade filtering (200uS), for efficient attenuation of lamp filament noise
Protection circuitry against accidental 400V wiring
Local status reporting: 400V - overtemperature - fan failure - processor check - presence of DMX signal - DMX and analogue control levels
Hard-fired thyristors for control of tungsten halogen lamps, resistive and inductive loads, transformer-fed low voltage lamps and fluorescent lighting with suitable ballasts
Heavy duty contactors for non-dimmable and special loads, such as HMI
Local test of a dimmer (steady, flash or chaser)
Automatic self-test capability
Programmable response to a DMX failure, including hold of last lighting cue
Permanent storage of all programmed data
High quality-low noise fans for effective cooling with automatic fan stop
Overtemperature protection through gradual dimmer fade-out
Specification
Individual channel protection by 1P HRC fuses with integrated "fuse ok" neon indicator
Optional 1P+N or MCB protection
Suitable for continuous duty (3kW or 5kW per dimmer) with 60kW maximum load at 35°C
Galvanic isolation on DMX input
Basic Specifications
Mechanical Eurorack 60 Height 1020 mm Width 555 mm Depth 135 mm Weight 43.0 kg Electrical Standard Systems Power Supply 220 - 240V AC Consumption 91A per phase
See also:
- Go back
- ADB ADN dimmer network system description
- ADB ADN Dimmer Management software
- ADB ADN Netbus controller
|
 |
 |