Animated Logo

Home & Information
Home
About techref.info
News

Technical Support
Go to HELPDESK

Regulations & Safety

Tech FAQ
Tech Reference

ADB ISIS Support
ADB Warp Support
ADB Dimmer Support

Capture Support

ADB Products
ADB
Emil Neithammer
ADB Archive

Related Products
Artistic Licence
Capture Sweden
CCT Lighting
DHA Lighting

Discontinued Lines

Links
Links & Downloads
Light Relief

Micro-Scope 3a

Artistic Licence Micro-Scope 3
Micro-Scope 3a
Portable DMX & MIDI tester

DMX512 and MIDI are now common place digital protocols and so specific test equipment is no longer a luxury.

Micro-scope 3 provides all the features regularly needed by both theatre and touring staff. Micro-scope 3 is a small hand-held DMX512 receiver and transmitter. It can operate as a Moving Light tester, a Flicker-Finder or as a Rigger's Remote. It is powered by an internal rechargeable battery, with a normal life of 25 hours and uses a high brightness backlit LCD screen.

Micro-scope 3 is very simple to operate. Switch on and you are immediately displaying received DMX512. Two key presses are all that is required to start flashing through the rig.

The built-in moving light personality library is used to test all the attributes of nearly 200 lamps. The lamp library can be edited and customised using the optional PC software Mic-Edit. Modifications are then quickly downloaded to Micro-scope using a serial link.

Fifteen preset memories which contain individual level settings for all 512 channels are available. Presets can be programmed with pre-defined patterns, by adjusting individual channels or by capturing received data. All data is held in non-volatile memory, so you can be sure that your preferred settings will still be there when you get off the plane!

Receiver

MIDI Adapter Cable 24 channel bar graph display
6 channel numeric display
Display decimal, hexadecimal, percentage or binary
Max, min & current channel level
Flicker-finder with hunt mode
Update rate, break time, MaB time
Number channels received
Snapshot to preset
Scope trigger output
Also receives MIDI

Transmitter

Moving lamp: check all attributes of 192 lamps
Rig check: single channel at a level
Dynamic: any range at a level or ramping
Auto-backup: go to Preset if desk fails
Buffer mode: retransmits incoming DMX or MIDI signal
Programmable start codes

Cable Tester

Double-ended: all combinations of three pins
Single-ended: shorts on pins 2 & 3

See also:


Back to top of page techref.info website © Copyright 2006-2012
Please read the Conditions of Use of this website.
Need help?
Go to Helpdesk
  Refresh page   Print page