|
|
|
Home & Information
Technical Support
ADB Products
Related Products |
Artistic Licence 
Navigation:
HOME |
Artistic Licence overview
> rackmount interface
> MIDI-DMX
|
MIDI-DMX
 |
| MIDI-DMX Rackmount MIDI/DMX Interface Unit |
MIDI-DMX is the ultimate show control solution. It provides the following input/output ports:
- DMX512 input/output
- MIDI input/output
- Eight volt free relay outputs
- Eight LED indicators
- Eight front panel push buttons
- MIDI-DMX can operate as either a MIDI to DMX512 or DMX512 to MIDI translator.
MIDI to DMX512
Three thumbwheels to the left of the panel allow the input MIDI channel and note offset to be selected. The data obtained from incoming MIDI Note commands is then translated to DMX512 output data. The DMX512 output can additionally be offset to a base address selected by the three thumbwheels on the right of the panel. The eight pushbuttons are able to toggle on or off MIDI notes, starting at the note selected by the input thumbwheels. The eight relay outputs are controlled in the same manner.
DMX512 to MIDI
The three thumbwheels to the left of the panel allow the base address of the input DMX512 to be set. The data obtained from incoming DMX512 is then translated to MIDI output data. The MIDI output is additionally offset by Channel and Note as selected by the three thumbwheels on the right of the panel. The eight pushbuttons are able to toggle on or off DMX512 channels, starting at the base address selected by the input thumbwheels. The eight relay outputs are controlled in the same manner.
Options
Other firmware versions are available for specific applications, including Dataton trax & Avolites consoles.
See also:
|
 |
 |