ADB SM22 [Discontinued]
|
|
ADB SM22 Manual control desk |
Manual control system for analogue dimmers
SM22 is a manually-operated lighting control desk with 2 presets for each channel.
Depending on the order configuration, the desk can be supplied with a mains power supply (for working with other dimmers) or without a power supply (for working with ADB FAL dimmer packs). It is manufactured either as a transportable case, or as a fixed control desk. It is usually delivered ready to use.
Analogue outputs are via serial 9-pole connectors. Channel flash buttons are available as an option.
One fader is provided for control, selectable as either a Master fader, or as a dipless linear crossfade. By means of the timing mode selector, the control of the fader can be direct or timed from 1 second to 65 minutes.
By special order, the SM22 can be fitted with a 9-pole plug for each group of six channels. The external signal must be between 0V and 10.2V DC. The external signal for ach input channel is compared to the settings on the control desk, and output is made on a 'comparative' basis - the higher value of control drives the dimmer output.
Main Features
- 12 channels, controllable in two presets
- Preset A and B master faders and blackout controls
- Switchable Master or Crossfade control
- Timed dipless crossfades from 1 second to 65 minutes, with linear progress display
- Channel flash buttons & flash master switch (option)
Supplied With
- Unknown
Options
- Flash module
- External modulator inputs
See also:
- Go back
- ADB SM26 manual control desk
- Go to ADB Archive
- Go to current ADB products
