ADB Eurorack 50: Installation digital dimmer cabinets [Discontinued]

Eurorack 50
24x 2.3kW

Building on the long-proven reliability and success of the Eurorack 60 installation dimmer, the Eurorack 50 offers 24 channels of 2.3kW dimming.

Eurorack 50 combines high quality with low cost and above average performance and is intended for general purpose applications in stage and architectural lighting, whenever space, cost and reliability are the prime considerations.

The standard Eurorack 50 is supplied with DIN rail terminations to the outgoing circuits, however Eurorack 50 is also available with a pre-wired hard patch installed within the dimmer cabinet. The lower front panel enloses 24 power outlets, available in most of the standard European formats, allowing circuits to be physically patched as required. The hard patch options available are illustrated below.

Hard Patch Options

24x Twin NF/CEBEC sockets
24x Twin Schuko sockets
24x Triple Swiss sockets
24x Single CEE 16A (P17) sockets
24x Single UK 15A sockets
24x Twin IEC 10A sockets

Main features

DMX digital input; optional analogue inputs
3-key keypad, 4-character LED display and user-friendly menus for easy access to all dimmer functions
Local test of a dimmer (steady or chaser)
10 dimmer laws, selectable per dimmer channel
Fade smoothing (4000 step resolution)
Last lighting cue maintained in case of DMX signal interruption
Permanent storage of all programmed data
Protection circuitry against accidental 400V wiring
Local status reporting: 400V - overtemperature - fan failure - processor check - presence of DMX signal - DMX and analogue control levels
First dimmer address selection
Storage of a lighting cue
Low noise fan for effective cooling with automatic fan stop
Overtemperature protection through gradual dimmer fade-out

Technical Specification

Individual channel protection by MCB/1P as standard
Optional 1P+N protection with MCB or HRC fuse
Optional RCD supply protection per group of 4 or 8 dimmer channels
Power supply: 230V / 400V Star £NPE (TN-S), 50/60 Hz
Suitable for continuous duty at 24x 10A at 35°C
DMX512 1990 input (on XLR5) with galvanic isolation
Optional +10V analogue inputs (on Dsub25)
Bottom panel fitted with PG31 steel pressure gland for supply cable, XLR5 connectors for DMX, and 24 holes for output cables
CE Approved

Supplied With

Kit of 24 universal seals for output cables
Instruction manual in four languages

Basic Specifications

Mechanical

Eurorack 50

Height 1020 mm

Width 555 mm

Depth 135 mm

Weight 34.0 kg

Electrical

Standard Systems

Power Supply 220 - 240V AC

Consumption 80A per phase

Mechanical
	Eurorack 50
Height	1020	mm
Width	555	mm
Depth	135	mm
Weight	34.0	kg
Electrical
	Standard Systems
Power Supply	220 - 240V AC
Consumption	80A per phase

Eurorack 50 is shipped as a complete unit, factory tested and ready for installation. No further assembling is required on site.