Home & Information Home About techref.info News Technical Support Go to HELPDESK Regulations & Safety Tech FAQ Tech Reference ADB ISIS Support ADB Warp Support ADB Dimmer Support Capture Support ADB Products ADB Emil Neithammer ADB Archive Related Products Artistic Licence Capture Sweden CCT Lighting DHA Lighting Discontinued Lines Links Links & Downloads Light Relief

Artistic Licence  Navigation:   HOME | Artistic Licence overview > Ethernet > Insta-Lynx Insta-Lynx Insta-Lynx Rackmount Ethernet Power Inserter Insta-Lynx is a mid-span power inserter for 10BaseT Ethernet. It is used to both terminate building Ethernet cables and also add low voltage power. This allows powered Ethernet products such as Down-Link and Up-Link to be powered over the CAT5 cable, without the need for additional power supplies. The building cables are terminated to rear mounted krone style punch down connectors. Power is applied to these connections via an electronic fuse rated at 170mA. The front panel provides latching Neutric Ethercon RJ45 connectors for connection to an external Ethernet hub. No power is applied to the front panel connectors. A total of twelve ports are provided. These are split into two banks of six. A power supply is required for each bank of six outlets. Alternatively, Insta-Lynx can be used as a CAT5 termination panel without power. Features 12 Ethernet Cable Termination points Insert power on to CAT5 cable Electronic cable protection Power state indication Reverse polarity protection Latching Ethercon RJ45 Specifications Listing: CE FCC IP Rating: Indoor use Output Voltage: 24VDC Output Current: 170mA per outlet Height: 1RU Width: 19" Rack Depth: 110mm Weight: 0.5kg See also: Go back Artistic Licence Ether-Lynx Artistic Licence Tour-Lynx techref.info website © Copyright 2006-2012 Please read the Conditions of Use of this website. Need help? Go to Helpdesk