ADB S28/II Control Desk (S28/II/2 S28/II/5 & S28/II/10) [Discontinued]
|
| ADB S28/II lighting desk |
Memory lighting control system
The S28/II is available in different versions, each having a differing number of controlled channels and submasters. The available systems are listed below:
| S28/II/2 | : 256 channels, patch upto 512 dimmers, 8 submasters |
| S28/II/5 | : 512 channels, patch upto 999 dimmers, 12 submasters |
| S28/II/10 | : 999 channels, patch upto 999 dimmers, 12 submasters |
Library storage of data is on 3½" floppy disk. Data output is DMX512 with galvanic isolation of the outputs.
Main Features
- 256, 512 or 999 channels
- 1 or 2 crossfades
- 8 or 12 submasters
- 1 channel control keyboard
- 1 memory control keyboard
- 1 Wheel for general control
- 2 Wheels for each crossfade
- 1 intensity cahannel wheel
- 1 submaster wheel
Supplied With
- 1 high-definition colour monitor
- 2m power supply cable
- Data plugs depending upon system configuration
- 1 box of 10 3½" floppy disks
- 1 installation/instruction manual
Options
- Special channel numbering enabling a non-continuous numbering of channels in use. (Configuration must be specified when ordering.)
- Hard copy printer with RS232 serial interface.
- Additional high-definition colour monitor (max 3).
- AZERTY alphanumeric keyboard, data cable & software.
- QWERTY alphanumeric keyboard, data cable & software.
- Infra-red independendent interface unit with 2m power supply cable and data cable (to be installed on the main control desk).
- Infra-red transmitted with battery charger.
- Infra-red receiver (max 9) with data cable plugs & mounting brackets.
- Data Booster (required for data lines longer than 250m).
See also:
- Go back
- ADB R28 remote control desk
- ADB E28 E28 effects system
- ADB B28 backup/remote desk
- Go to ADB Archive
- Go to current ADB products
