Home & Information Home About techref.info News Technical Support Go to HELPDESK Regulations & Safety Tech FAQ Tech Reference ADB ISIS Support ADB Warp Support ADB Dimmer Support Capture Support ADB Products ADB Emil Neithammer ADB Archive Related Products Artistic Licence Capture Sweden CCT Lighting DHA Lighting Discontinued Lines Links Links & Downloads Light Relief

ADB Lighting Technologies  Navigation:   HOME | ADB ISIS Support > definition files > installation Installing ISIS Instrument Definition Files New instrument definition files, generated by techref.info, must be installed on the ISIS system before they can be used. Follow the instructions below to perform the operation. If you have any questions, please the webweaver. Installation Instructions Copy the downloaded ISIS definition file (UDF file) to a floppy disk. Start the ISIS System and press "D" when the screen shows the startup options. This will go to a DOS interface mode. Insert the floppy disc into the floppy drive. Copy the files by typing the command copy a:\*.udf c:\phoenix\adb and then press the [enter] key. Once the files have been copied across, turn off the ISIS system (power off). Remove the floppy disc from the floppy drive. Restart the ISIS system normally. Don't forget to perform the update on any Backup unit too to ensure correct operation. See also: Go back techref.info website © Copyright 2006-2012 Please read the Conditions of Use of this website. Need help? Go to Helpdesk